Technical question

[Sasquatch04]

Good day,,,,,,

Need some technical advise regarding my OTA antenna set up,,,,

I am planning to install my OTA where one of my dish is,,,,,,,I would be planning to use the RG6 cable same already connected to my disecq switch,,,,,,in order to avoid running another RG6 all the way inside the house,,,,,could I use the same cable and leave it connected to my disecq switch,,,,,,,,If so could I run the risk of frying my disecq switch or not,,,,

I am asking this question,,,,,,so if this could work,,,,I would avoid running more cable,,,and grounding again,,,,,,,since the RG6 presently connected to the disecq switch is already grounded,,,,

Yr input wld be appreciated,,,,

[satchick]

I don't think the diseqc switches will pass OTA frequencies... You could use a diplexer on the receiver output of the diseqc switch though... You would then use a second diplexer inside...

http://i42.tinypic.com/2csflg8.jpg

[Sasquatch04]

Thank you satchick,,,actually ran some rg6 in the house,,,,works beautiful,,,,,Tks for yr help,,,,,

Cheers,,,,,